| Pin |
Symbol |
Description |
| 1 | NC | Not Connected |
| 2 | GND | Ground |
| 3 | SS_INH | A logic signal (Active low) disables the device(Sleep mode operation). A capacitor connected between this pin and ground determines the soft start time. When this pin is grounded disables the device. |
| 4 | OSC | An external resistor connected between the unregulated input voltage and this pin and a capacitor connected from this pin to ground fix the switching frequency. |
| 5 | OUT | Stepdown regulator output. |
| 6 | OUT | Stepdown regulator output. |
| 7 | NC | Not Connected |
| 8 | NC | Not Connected |
| 9 | NC | Not Connected |
| 10 | NC | Not Connected |
| 11 | VCC | Unregulated DC input voltage |
| 12 | BOOT | A capacitor connected between this pin and output allows to drive the internal DMOS transistor. |
| 13 | COMP | E/A output to be used for frequency compensation. |
| 14 | FB | Connecting output directly to this pin results in output voltage of 3.3v. An external voltage divider is require for higher output voltages. |
| 15 | NC | Not Connected |
| 16 | NC | Not Connected |
